Item Tag: PLC End Cap

Allen Bradley, 5069-ECR, PN-378844, Compact Logix 5380 End Cap PLC

Allen Bradley 5069-ECR End CapDetails: You are buying one new Allen Bradley 5069-ECR End Cap as shown in the pictures. Its always best to call for any Nextday orders. Surplus from a large manufacturers spare parts room. Please check our other listings for more surplus, we specialize in hard to find or obsolete parts, please call us for any of your parts needs. We buy sell and repair ALL industrial electrical parts. Location 10-15. Shipping Information: We ship UPS and USPS daily (M-F) and use other freight carriers as needed. For international deliveries we use UPS and DHL. Our staff has been shipping packages for decades and we will make sure your parts are packed well and get to you on time. Please verify that your paypal address is correct for your protection as we do not ship to unregistered addresses. Special delivery arrangements can be made as needed (e.g., UPS for Canadian Customers) and we insure deliveries over $200. Returns: We offer a standard 30-day return policy on items that are defective or otherwise do not match the ebay description. We carefully control and monitor the condition of our items and part swapping or tampering with items will nullify our return policy and no refund will be issued. Returned items will be reviewed and serial numbers verified. If we have a replacement one will be shipped immediately otherwise a refund will be made which does not exceed the purchase price. Contact: Emails are answered daily. Please use the Ask a Question link below.

Allen Bradley CompactLogix 1769-ECR PLC End Cap

Allen Bradley CompactLogix 1769-ECR PLC End CapUsed: Item is removed from a retired process machine. The Allen-Bradley 1769-ECR is a Right End Cap (ECR) module that is used with the CompactLogix controller series. This module functions as a bus terminator, terminating the FlexBus circuitry, signaling the end of the CompactLogix assembly. This module is necessary to qualify the CompactLogix configuration. The 1769-ECR features a current draw of 5 mA at 5.1 VDC. It has an operating altitude of 2000 m or 6562 ft and approximately weighs 130 grams or 0.286 lb. It has an open style enclosure rating, an operating temperature of 0 -60 °C or 32-140 °F) while the storage temperature is -40 to 85 °C (-40 to 185 °F and relative humidity of 5-95%, non-condensing. It must be installed at a location with vibration not exceeding 5 g, 10-500 Hz. It also has an operating shock rating of 20g when DIN rail is mounted and 30g when the CompactLogix system is directly mounted to the enclosure. The 1769-ECR must only be installed or removed when power is removed from the system. Removal or insertion under power will cause controller error and stoppage which is not desirable especially with a functional and actively operating system. To install the 1769-ECR, the bus lever must be lifted from its engaged position. Once done, align the ECR module along with the guide slots and gently push the ECR module until it is adjacent and in line with the CompactLogix module. Engaged the bus lever to connect the ECR module and close the FlexBus. If resistance is felt during the engagement of the bus lever, inspect if the ER is properly aligned to the module and the guide slot. The Allen-Bradley 1769-ECR is a right end cap or terminator that terminates the end of the communication bus of a 1769 controller. It has a maximum bus current draw of 5 mA at 5V DC. It comes with an operating altitude of 6562 feet and an approximate shipping weight of 0.286 lbs. It has an open-type enclosure to ensure safety and it can adapt to certain conditions to reduce the risk of fire and injury. To meet health and safety requirements, the 1769-ECR should be installed with IP54 protection when applied in zone 2 environments because it has no tolerance for sunlight and other UV radiation sources. The 1769-ECR has an operating temperature of 32 – 140 deg. F tested in cold, dry heat, and thermal shock environments. It has a non-operating temperature of 40 – 185 deg. F tested unpackaged during cold, dry heat, and thermal shock. The also 1769-ECRhas a 5 – 95% noncondensing relative humidity and its vibration reaches 5 g at 10 – 500 Hz tested during operating. It has an operating shock is 20 g on a DIN rail mount and 30 g on a panel mount. Its non-operating shock is 30 g on a DIN rail and 40 g on a Panel mount. Technical specifications for 1769-ECR Manufacturer Rockwell Automation Brand Allen-Bradley Brand Allen-Bradley Series CompactLogix Part Number/Catalog No. 1769-ECR Module Type Right End Cap Product Line CompactLogix Current draw at 5.1V DC 5 mA Module Type Right End Cap Module Current draw at 24V DC 0 mA Operating altitude 2000 m (6562 ft) Shipping Weight 2 lbs. North American temp code T3C Shipping Dimensions 8X8X5 in. IEC temp code T4 Series A and B Shipping weight, approx 130 g (0.286 lb) Operating Temperature 0 -60 °C or 32-140 °F Enclosure type rating None (open style) Maximum Bus Current Draw 5 mA at 5 volts DC Removal and Insertion Under Power (RIUP) Not supported Backplane Current 1.4 Amps at 24 Volts Operating Vibration 5 g, 10…500 Hz Power Consumption 33.6 Watts Operating Shock DIN rail mount: 20 g; Panel mount: 30 g Power Dissipation 7.5 Watts UPC 10662468993040 UNSPSC 32151703Shipping Options:(Not Selected)(Not Selected)(Not Selected)Return Policy Powered by SixBit’s eCommerce Solution